HP ProLiant DL385p, Руководство по техническому обслуживанию и ремонту

Страница: 34 / 102

Removal and replacement procedures 34
6.
Remove the PCIe riser cage.
To install the component, reverse the removal procedure.
Remove the secondary PCIe riser cage
CAUTION: To prevent damage to the server or expansion boards, power down the server
and remove all AC power cords before removing or installing the PCIe riser cage.
To remove the component:
1.
Power down the server (on page 25 ).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Extend the server from the rack (on page 26 ).
4.
Remove the access panel (" Access panel " on page 30 ).