HP ProLiant DL385p, Руководство по техническому обслуживанию и ремонту

Страница: 32 / 102

Removal and replacement procedures 32
2U rack bezel
To remove the component:
To replace the component, reverse the removal procedure.
PCIe riser blank
CAUTION: To prevent improper cooling and thermal damage, do not operate the server
unless all PCI slots have either an expansion slot cover or an expansion board installed.
To remove the component:
1.
Power down the server (on page 25 ).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Extend (" Extend the server from the rack " on page 26 ) or remove (" Remove the server from the rack "
on page 27 ) the server from the rack.
4.
Remove the access panel (" Access panel " on page 30 ).