HP ProLiant DL170h G6, Руководство по техническому обслуживанию и ремонту, Страница: 84 / 89

Physical and Operating Specifications 84
Table 13
Hardware Specifications
Item Components
Status LED indicators
Front panel
Rear Panel
System Board •
Power/system health status
•
UID status
•
NIC activity
•
LAN activity
•
LAN link status
•
Power/system health status
•
UID status
•
Auxiliary power indicators
Power Supply unit (PSU) 1200W Redundant, power supply
Thermal solution Four 80mm system fans
Table 14
Physical Dimensions
Item Description
System board platform ATX (Advanced Technology Extended)
System board dimension 17.935’’x6.5’’
Dimensions (H x W x D)
(with bezel) 3.44 x 17.64 x 28.91 in (8.74 x 44.81 x 73.43 cm)
Server weight (approximate) Maximum (all hard drives, power supplies, and processors installed)
82.00 lb (37.19 kg)
Minimum (one hard drive, power supply, and processor installed)
40.00 lb (18.14 kg)
Table 15
Environmental Specifications
Item Description
Thermal output (maximum operating) 392 W/hr
System inlet temperature
Operating 50° to 95° F (10° to 35° C) at sea level with an altitude derating of
1.8°F per every 1000 ft (1.0°C per every 305 m) above sea level to a
maximum of 10,000 ft (3050 m), no direct sustained sunlight.
Maximum rate of change is 18°F/hr (10°C/hr). The upper limit may be
limited by the type and number of options installed.
System performance may be reduced if operating with a fan fault or
above 86°F (30°C).
System inlet temperature
Non-operating 40° to 140° F (-40° to 60° C)
Maximum rate of change is 36°F/hr (20°C/hr).
Relative humidity (non-condensing)
Operating 10% to 85% relative humidity (Rh), 82.4°F (28°C) maximum wet bulb
temperature, non-condensing.
All manuals and user guides at all-guides.com