manualshive.com logo in svg

HP ProLiant DL170h G6, Руководство по техническому обслуживанию и ремонту, Страница: 74 / 89

Поделиться
Скачать
HP ProLiant DL170h G6 Скачать руководство пользователя страница 74

 

 

Diagnostic tools and Setup Utilities  74  

 

 

•

 

Set boot features: 

○

 

Enable or Disable POST Speed up. 

○

 

Enable or Disable Bootup Num-Lock. 

○

 

Set restore on AC power loss options, such as last state, power off, and power on. 

○

 

If BIOS displays an error message, set POST F1 Prompt for selections, such as delayed, 

enabled, or disabled. 

Advanced Menu 

Figure 59 

Advanced menu of the BIOS setup utility 1 

 

 

WARNING:

 Incorrect settings may cause the server to malfunction. To correct the settings, press F9 

key to restore the default settings. 

•

 

CPU Configuration

 – Configure and view the current CPU configuration and settings. 

•

 

IDE Configuration 

– Use this screen to select options for the IDE Configuration Settings.  

•

 

IO Device Configuration

 – Configure the serial port settings of the server. 

•

 

ACPI Configuration

 – Use this screen to select options for the ACPI Configuration settings. 

•

 

IPMI

 

Configuration

 – Configure the Intelligent Platform Management Interface (IPMI) settings. 

•

 

USB Configuration 

--- Configure the USB settings of the server. 

•

 

Remote Access Configuration

 – Select console redirection in the left frame of the screen to go to 

the sub menu for that item. Console redirection Setup options are described in this section. 

•

 

PCI BUS Configuration

 –Use this screen to select options for PCI Express Devices.  

•

 

Power Configuration 

–Use this screen to select options for the Power Configuration. 

All manuals and user guides at all-guides.com

Содержание ProLiant DL170h G6


























































































Отзывы:

Нет отзывов