HP ProLiant DL170h G6, Руководство по техническому обслуживанию и ремонту, Страница: 50 / 89

Removal and Replacement Procedures 50
Figure 30 Removing the PCIe riser card
To install the PCIe riser card:
1.
Align the riser card slot to the connector on the main board and then push the card into the
connector.
2.
Install and tighten the two screws that secure the riser card to the chassis.
Figure 31 Installing PCIe riser card
To remove the PCIe card:
1.
Remove the screw that secures the PCIe card.
2.
Open the PCIe latch.
3.
Pull the PCIe card back and away from the PCIe riser card.
4.
Slide the PCIe bracket across the chassis.
5.
Close the PCIe latch.
All manuals and user guides at all-guides.com