HP ProLiant DL170h G6, Руководство по техническому обслуживанию и ремонту, Страница: 45 / 89

Removal and Replacement Procedures 45
2.
Gently place in the air baffle.
Figure 20 Installing the air baffle
Memory
HP ProLiant DL170h Generation 6 server has sixty-four DIMM slots that support up to 512 GB
maximum system memory.
You must adhere to the following guidelines when adding or replacing memory modules:
•
For 8P system, both physical processors in each Node must be of the same type and speed.
•
Use 800/1066/1333 MHz Registered/Unbuffered ECC DDR3 Memory.
•
Supported DIMM: 512 MB, 1 GB, 2 GB, 4GB and 8GB (256GB maximum capacity) DDR3
Figure 21 DIMM slots
NOTE: Before installing the memory, remove the air baffle first, for detailed procedure, refer to the
‘Processor’ section in this chapter.
To remove memory module:
All manuals and user guides at all-guides.com