HP ProLiant DL170h G6, Руководство по техническому обслуживанию и ремонту, Страница: 46 / 89

Removal and Replacement Procedures 46
1.
Completely open the holding clips securing the module.
2.
Gently pull the memory module upward to remove it from the slot.
Figure 22 Removing a memory module
CAUTION: Place the memory module on a static-dissipating work surface or inside of an anti-static
bag.
To install a memory module:
1.
Align the notch on the bottom edge of the module with the keyed surface of the DIMM slot and
then press the module fully into the slot.
2.
Firmly press the holding clips inward to secure the memory module in place.
Figure 23 Installing a memory module
CAUTION: The memory slots are structured to ensure proper installation. If you insert a memory
module but it does not fit easily into the slot, you may have inserted it incorrectly. Double-check the
orientation of the module and reinsert. If the holding clips do not close, the module is not inserted
correctly.
All manuals and user guides at all-guides.com
all-guides.com