HP ProLiant DL100 G2 DPSS, Руководство администратора

Страница: 139 / 155

NOTE:
If any of the adapters on an SLB (Auto-Fallback Disable) type of team is disabled, this type of team cannot
function as described. Instead, the team functions as a Smart Load Balancing and Failover type of team.
Creating a team
Perform the steps in this section to create a team and con fi gure the NIC team IP address:
NOTE:
Enabling Dynamic Host Con fi guration Protocol (DHCP) is not recommended for members of an SLB
type of team
1. From the Tools menu, click Create a Team . The available adapters are listed (these adapters are
not currently members of any team).
2. Type a team name in the Enter a name you will use to identify this team box.
3. Select the type of team, and then click Next .
4. Assign any available device or devices to the team by moving the device from the Available
Adapters list to the Load Balance Members list. There must be at least one device in the Load
Balance Members list.
5. If desired, assign any other available device or devices to the team by moving the device from the
Available Adapters list to the Standby Member list.
NOTE:
There must be at least one Broadcom network adapter assigned to the team.
6. Click Apply .
7. Click Yes when the message is displayed indicating that the network connection will be temporarily
interrupted.
Teaming guidelines
Be aware of the following teaming guideline:
• The number of characters that can be used in a team name is a minimum of 1 and a maximum
of 39.
• A team name cannot begin with spaces or contain the character "&."
• Team names must be unique. If you attempt to use a team name more than once, an error
message is displayed indicating that the name already exists.
• The maximum number of team members is 8.
• When team con fi guration has been correctly performed, a virtual team adapter driver is created
for each con fi gured team.
• To view the con fi guration of the team, click Preview before clicking Apply. If you are satis fi ed with
the con fi guration, click Con fi gure. If you are not satis fi ed, either delete the team, or recon fi gure it.
• If you disable a virtual team and later want to re-enable it, you must fi rst disable and re-enable all
team members before you re-enable the virtual team.
• When you create Generic Trunking and Link Aggregation teams, you cannot designate a
standby member. Standby members work only with Smart Load Balancing and Failover and
SLB (Auto-Fallback Disable) types of teams.
• For an SLB (Auto-Fallback Disable) team, to restore traf fi c to the load balance members from the
standby member, click the Fallback button on the Team Properties tab.
HP ProLiant DL100 G2 Storage Server administration guide
139