Removal and replacement procedures 41
7.
Remove the heatsink blank.
To replace the component, reverse the removal procedure.
Serial label pull tab
To remove the component:
1.
Power down the server blade (on page
2.
Remove the server blade (on page
3.
Remove the access panel ("
" on page
CAUTION:
Always disconnect the drive cables from the SAS controller before removing the
DIMM baffle. Failure to do so may result in damage to the SAS controller.
4.
Disconnect the drive cables from the SAS controller and remove the DIMM baffle ("
" on
5.
Remove all hard drives ("
" on page
6.
Remove the front panel/drive cage assembly ("
Front panel/drive cage assembly
" on page
Содержание ProLiant BL465c Gen8
Страница 12: ...Customer self repair 12 ...
Страница 13: ...Customer self repair 13 ...
Страница 14: ...Customer self repair 14 ...
Страница 20: ...Illustrated parts catalog 20 ...