HP ProLiant BL465c Gen8 Скачать руководство пользователя страница 22

Страница: 22 / 82

Removal and replacement procedures 22

Symbols on equipment

The following symbols may be placed on equipment to indicate the presence of potentially hazardous

conditions.

This symbol indicates the presence of hazardous energy circuits or electric shock

hazards. Refer all servicing to qualified personnel.

WARNING:

To reduce the risk of injury from electric shock hazards, do not open this

enclosure. Refer all maintenance, upgrades, and servicing to qualified personnel.

This symbol indicates the presence of electric shock hazards. The area contains no user
or field serviceable parts. Do not open for any reason.

WARNING:

To reduce the risk of injury from electric shock hazards, do not open this

enclosure.

This symbol on an RJ-45 receptacle indicates a network interface connection.

WARNING:

To reduce the risk of electric shock, fire, or damage to the equipment, do

not plug telephone or telecommunications connectors into this receptacle.

This symbol indicates the presence of a hot surface or hot component. If this surface is

contacted, the potential for injury exists.

WARNING:

To reduce the risk of injury from a hot component, allow the surface to cool

before touching.

6.3 kg

13.9 lb

This symbol indicates that the component exceeds the recommended weight for one
individual to handle safely.

WARNING:

To reduce the risk of personal injury or damage to the equipment, observe

local occupational health and safety requirements and guidelines for manual material
handling.

These symbols, on power supplies or systems, indicate that the equipment is supplied
by multiple sources of power.

WARNING:

To reduce the risk of injury from electric shock, remove all power cords to

completely disconnect power from the system.

Server blade preparation

To service any internal server blade component, power down the server blade and remove it from the
enclosure.

Power down the server blade

Before powering down the server blade for any upgrade or maintenance procedures, perform a backup of
critical server data and programs.

IMPORTANT:

When the server blade is in standby mode, auxiliary power is still being provided

to the system.

Depending on the OA configuration, use one of the following methods to power down the server blade:

•

Press and release the Power On/Standby button.

Содержание ProLiant BL465c Gen8



















































































Результаты поиска

Содержание ProLiant BL465c Gen8

Отзывы:

Похожие инструкции для ProLiant BL465c Gen8

Бренды по названию

Популярные бренды

HP ProLiant BL465c Gen8, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProLiant BL465c Gen8

Отзывы:

Похожие инструкции для ProLiant BL465c Gen8

Бренды по названию

Популярные бренды