HP ProLiant BL360 G5 Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 60

HP ProLiant BL360 G5 Скачать руководство пользователя страница 51

Diagnostic tools 51

This functionality supports operating systems that may not be supported by the server blade. For operating

systems supported by the server blade, see the HP website (

http://www.hp.com/go/supportos

If a significant change occurs between data-gathering intervals, the survey function marks the previous

information and overwrites the survey data files to reflect the latest changes in the configuration.
Survey functionality is installed with every SmartStart-assisted HP Insight Diagnostics installation, or it can

be installed through the HP PSP.

NOTE:

The current version of SmartStart provides the memory spare part numbers for the

server blade. To download the latest version, see the HP website

(

http://www.hp.com/support

Integrated Management Log

The IML records hundreds of events and stores them in an easy-to-view form. The IML timestamps each

event with 1-minute granularity.
You can view recorded events in the IML in several ways, including the following:

•

From within HP SIM

•

From within Survey Utility

•

From within operating system-specific IML viewers

o

For NetWare: IML Viewer

o

For Windows®: IML Viewer

o

For Linux: IML Viewer Application

•

From within the iLO 2 user interface

•

From within HP Insight Diagnostics (on page

For more information, refer to the Management CD in the HP ProLiant Essentials Foundation Pack.

USB support and functionality

USB support

HP provides both standard USB support and legacy USB support. Standard support is provided by the OS
through the appropriate USB device drivers. Before the OS loads, HP provides support for USB devices

through legacy USB support, which is enabled by default in the system ROM.
Legacy USB support provides USB functionality in environments where USB support is not available

normally. Specifically, HP provides legacy USB functionality for the following:

•

POST

•

RBSU

•

Diagnostics

•

DOS

•

Operating environments which do not provide native USB support

«
...
49
50
51
52
53
...
»

Содержание ProLiant BL360 G5





























































Отзывы:

Нет отзывов