HP ProLiant BL360 G5, Руководство по техническому обслуживанию и ремонту, Страница: 34 / 60

Removal and replacement procedures 34
CAUTION: To prevent possible server blade overheating, always populate processor socket 2
with a processor and a heatsink or a processor socket cover and a heatsink blank.
CAUTION: The heatsink thermal interface media is not reusable and must be replaced if the
heatsink is removed from the processor after it has been installed.
IMPORTANT: When installing the heatsink, align the guide pins on the processor retention
bracket with the alignment holes in the heatsink.
IMPORTANT: Processor socket 1 must always be populated. If processor socket 1 is empty, the
server blade does not power up.
NOTE: Do not discard the processor protective cover. Always install the processor protective
cover if the processor is removed from the socket.
To remove the component:
1.
Power down the server blade (on page 23 ).
2.
Remove the server blade (on page 23 ).
3.
Remove the access panel (" Access panel " on page 24 ).
4.
Remove the hard drive cage/bezel assembly (" Hard drive cage/bezel assembly " on page 27 ).
5.
Remove the heatsink (" Heatsink " on page 31 ).
6.
Open the processor retaining latch and the processor socket retaining bracket.