Removal and replacement procedures 33
3.
Install the heatsink.
4.
Install the hard drive cage/bezel assembly ("
Hard drive cage/bezel assembly
5.
6.
Install the server blade.
Processor
This HP ProLiant server blade supports uni-processors. When installing a uni-processor, always observe
the following guidelines:
•
Always install the uni-processor in processor socket 1.
•
Do not install any additional processors.
•
Always populate remaining sockets with a processor socket cover and heatsink blank.
Failure to follow these guidelines causes the system to crash during boot.
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:
To avoid damage to the system board:
•
Do not touch the processor socket contacts.
•
Always install the processor socket cover after removing the processor from the socket.
•
Do not tilt or slide the processor when lowering the processor into the socket.
CAUTION:
To avoid damage to the processor:
•
Handle the processor only by the edges.
•
Do not touch the bottom of the processor, especially the contact area.
CAUTION:
To prevent possible server malfunction and damage to the equipment,
multiprocessor configurations must contain processors with the same part number.
Содержание ProLiant BL360 G5
Страница 12: ...Customer self repair 12 ...
Страница 13: ...Customer self repair 13 ...
Страница 14: ...Customer self repair 14 ...
Страница 15: ...Customer self repair 15 ...
