HP ProDesk 600, Руководство по техническому обслуживанию и ремонту

Страница: 223 / 245

There are two types of recovery media. To determine which steps to follow for your computer:
1. Click the Start button.
2. Click All Programs .
●
If Security and Protection is listed, continue with the steps in Creating recovery media
using HP Recovery Manager (select models only) on page 213 .
●
If Productivity and Tools is listed, continue with the steps in Creating recovery discs with
HP Recovery Disc Creator (select models only) on page 214 .
Creating recovery media using HP Recovery Manager (select models only)
●
To create recovery discs, your computer must have a DVD writer. Use DVD+R or DVD-R discs
(purchased separately). The discs you use will depend on the type of optical drive you are using.
NOTE: DVD+R DL, DVD-R DL, or DVD±RW disc are not supported.
●
You have the option of creating a recovery USB flash drive instead, using a high-quality USB
drive.
●
If you are creating recovery discs, be sure to use high-quality discs. It is normal for the system to
reject defective discs. You will be prompted to insert a new blank disc to try again.
●
The number of discs in the recovery-disc set depends on your computer model (typically 3 to 6
DVDs). The Recovery Media Creation program tells you the specific number of blank discs needed
to make the set. If you are using a USB flash drive, the program will tell you the size of the drive
required to store all the data (minimum of 8 GB).
NOTE: The process of creating recovery media is lengthy. You can quit the process at any time.
The next time you initiate the process, it resumes where it left off.
NOTE: Do not use media cards for creating recovery media. The system may not be able to boot up
from a media card and you may not be able to run system recovery.
To create recovery discs:
1. Close all open programs.
2. Click the Start button, click All Programs , click Security and Protection , click Recovery
Manager , and then click HP Recovery Media Creation . If prompted, click Yes to allow the
program to continue.
3. Click Create recovery media using blank DVD(s) , and then click Next .
4. Follow the on-screen instructions. Label each disc after you make it (for example, Recovery 1,
Recovery 2), and then store the discs in a secure place.
To create a recovery USB flash drive:
Backing up, restoring, and recovering in Windows 7 213