HP ProDesk 400 G2 Скачать руководство пользователя

Страница: 84 / 160

Using Computer Setup (F10) Utilities

Computer Setup can be accessed only by turning the computer on or restarting the system. To access the

Computer Setup Utilities menu, complete the following steps:

Turn on or restart the computer.

Repeatedly press

F10

when the monitor light turns green to access the utility.

You can also press

Esc

to a menu that allows you to access different options available at startup,

including the Computer Setup utility.

NOTE:

If you do not press

F10

at the appropriate time, you must restart the computer and again

repeatedly press

F10

when the monitor light turns green to access the utility.

NOTE:

If the Computer Setup (F10) Utility is set to “fast boot”, use one of the following procedures to

access Computer Setup:

●

Before turning on the computer, press and hold

F10

. Turn on the computer and continue to hold

F10

until the Computer Setup (F10) Utility is displayed.

- or –

●

Follow the Windows 8 instructions for rebooting the computer into the Computer Setup (F10)

Utility.

A choice of five headings appears in the Computer Setup Utilities menu: File, Storage, Security, Power,

and Advanced.

Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and down) keys

to select the option you want, then press

Enter

. To return to the Computer Setup Utilities menu, press

Esc

To apply and save changes, select

File

Save Changes and Exit

●

If you have made changes that you do not want applied, select

Ignore Changes and Exit

●

To reset to factory settings or previously saved default settings (some models), select

Apply

Defaults and Exit

. This option will restore the original factory system defaults.

NOTE:

Not all settings shown in the following sections are available for all models

CAUTION:

Do NOT turn the computer power OFF while the BIOS is saving the Computer Setup (F10) changes

because the CMOS could become corrupted. It is safe to turn off the computer only after exiting the F10

Setup screen.

Chapter 6 Computer Setup (F10) Utility

Содержание ProDesk 400 G2

































































































































































Результаты поиска

Содержание ProDesk 400 G2

Отзывы:

Похожие инструкции для ProDesk 400 G2

Бренды по названию

Популярные бренды

HP ProDesk 400 G2, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProDesk 400 G2

Отзывы:

Похожие инструкции для ProDesk 400 G2

Бренды по названию

Популярные бренды