HP ProDesk 400 G2 страница 32 Скачать руководство пользователя

Страница: 32 / 160

Screws

The screws used in the computer are not interchangeable. They may have standard or metric threads and

may be of different lengths. If an incorrect screw is used during the reassembly process, it can damage the

unit. HP strongly recommends that all screws removed during disassembly be kept with the part that was

removed, then returned to their proper locations.

CAUTION:

Metric screws have a black finish. U.S. screws have a silver finish and are used on hard drives

only.

CAUTION:

As each subassembly is removed from the computer, it should be placed away from the work

area to prevent damage.

Cables and connectors

Most cables used throughout the unit are flat, flexible cables. These cables must be handled with care to

avoid damage. Apply only the tension required to seat or unseat the cables during insertion or removal from

the connector. Handle cables by the connector whenever possible. In all cases, avoid bending or twisting the

cables, and ensure that the cables are routed in such a way that they cannot be caught or snagged by parts

being removed or replaced.

CAUTION:

When servicing this computer, ensure that cables are placed in their proper location during the

reassembly process. Improper cable placement can damage the computer.

Hard Drives

Handle hard drives as delicate, precision components, avoiding all physical shock and vibration. This applies

to failed drives as well as replacement spares.

●

If a drive must be mailed, place the drive in a bubble-pack mailer or other suitable protective packaging

and label the package “Fragile: Handle With Care.”

●

Do not remove hard drives from the shipping package for storage. Keep hard drives in their protective

packaging until they are actually mounted in the CPU.

●

Avoid dropping drives from any height onto any surface.

●

If you are inserting or removing a hard drive, turn off the computer. Do not remove a hard drive while

the computer is on or in standby mode.

●

Before handling a drive, ensure that you are discharged of static electricity. While handling a drive,

avoid touching the connector.

●

Do not use excessive force when inserting a drive.

●

Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic fields

such as monitors or speakers.

Lithium coin cell battery

The battery that comes with the computer provides power to the real-time clock and has a minimum lifetime

of about three years.
See the appropriate removal and replacement chapter for the chassis you are working on in this guide for

instructions on the replacement procedures.

WARNING!

This computer contains a lithium battery. There is a risk of fire and chemical burn if the battery

is handled improperly. Do not disassemble, crush, puncture, short external contacts, dispose in water or fire,

or expose it to temperatures higher than 140ºF (60ºC). Do not attempt to recharge the battery.

Chapter 4 Routine care, SATA drive guidelines, and disassembly preparation

Содержание ProDesk 400 G2

































































































































































Результаты поиска

Содержание ProDesk 400 G2

Отзывы:

Похожие инструкции для ProDesk 400 G2

Бренды по названию

Популярные бренды

HP ProDesk 400 G2, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProDesk 400 G2

Отзывы:

Похожие инструкции для ProDesk 400 G2

Бренды по названию

Популярные бренды