2-11
Getting Started
Configure the Controller
Assign an IP Address to the MSM765zl LAN Port
The starting point for this procedure is the CLI prompt that looks like this:
ProCurve Switch 5406zl#
To set the MSM765zl LAN port IP address:
1.
Select the MSM765zl of interest, specifying the slot and index determined
earlier.
services <slot-id> <index>
2.
Enable the chosen MSM765zl CLI and select its config context:
enable
config
3.
Select the MSM765zl LAN port interface:
interface ip lan
4.
Assign it an IP address of 192.168.1.1 and a subnet mask of 255.255.255.0.
ip address 192.168.1.1/24
The following sample screen shows the commands from the above 4-step
procedure, using slot C with an index of 2:
Configure the MSM765zl Internet Port
The procedures in this section are performed with the MSM765zl management
tool and a web browser on your computer.
This is an initial configuration procedure for the MSM765zl, enabling you to
establish a wired connection through the MSM765zl to the Internet. The
MSM765zl is managed via its Web-based management tool using at least
Microsoft Internet Explorer 7.0 or Mozilla Firefox 2.0.
N o t e
Some prompts only appear when the MSM765zl is in its factory-default state.
1.
Disconnect any cable from your computer LAN port, and disable any
wireless connection.
MSM765-IGSG-5992-5964.book Page 11 Thursday, April 2, 2009 6:48 PM
