manualshive.com logo in svg

HP ProCurve MSM765zl, Руководство по установке и началу работы

Поделиться
Скачать
HP ProCurve MSM765zl Скачать руководство пользователя страница 37

C-1

C

Hardware Components

Front Panel Port and LEDs

This section describes the different buttons and LEDs on the front panel of an 
MSM765zl.

Figure 3.

MSM765 front panel

■

USB Port: This port is used to attach a USB device, such as a flash drive.

■

The following table describes the LEDs on the front panel. 

MSM765zl Locator LED

HDD and CF Status LEDs

HDD and Network 
activity LEDs

USB port

Module Status LED

MSM765zl LED

State

Meaning

Module Status 
(green/orange)

Blinking 
green
Solid green
Blinking/
solid 
orange

Initialization was successful. Stays in this state when the 
MSM765zl is booted to Service OS.
MSM765zl is operational.
Error condition

This LED is off by default.
Blinking cycle (green or orange) is 400ms on – 400ms off.
At boot, the Module Status, HDD Status, and CF Status LEDs 
are solid green for ~2s, then solid orange for ~2s, then back 
to solid green for ~1s, and finally all are turned off. 

MSM765-IGSG-5992-5964.book  Page 1  Thursday, April 2, 2009  6:48 PM

Содержание ProCurve MSM765zl

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды