manualshive.com logo in svg

HP ProCurve MSM765zl, Руководство по установке и началу работы

Поделиться
Скачать
HP ProCurve MSM765zl Скачать руководство пользователя страница 17

2-5

Getting Started

Configure the Controller

Install the Product License Key

The starting point for this procedure is the Service OS CLI prompt for the 
MSM765zl you are activating. If you do not have this prompt available, follow 
the directions in 

“Obtain the Activation Hardware ID” on page 2-3

.

1.

Install the product license key:

licenses install activation <license key>

Where 

<license key>

 is the product license key just provided by the My 

ProCurve portal. The key must be entered precisely as received including 
the dashes. If possible, copy and paste the string as received. For example:

2.

Boot the MSM765zl product:

boot product

The boot image is verified.

3.

At prompt: 

System will be rebooted.Do you want to continue [y/n]?

Respond with “

y

”.

The product reboots.

For example:

Configure the Switch for the MSM765zl

The switch must be configured to work properly with the MSM765zl.

This procedure assumes that there are Ethernet port modules installed in slot 
A, and that the MSM765zl is installed in slot C. Sample VLAN IDs and names 
are used. You will need to adjust

 

the procedure according to slots chosen and 

VLAN IDs and names used.

MSM765-IGSG-5992-5964.book  Page 5  Thursday, April 2, 2009  6:48 PM

Содержание ProCurve MSM765zl

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды