manualshive.com logo in svg

HP ProCurve MSM765zl, Руководство по установке и началу работы

Поделиться
Скачать
HP ProCurve MSM765zl Скачать руководство пользователя страница 8

1-2

Hardware Installation

Installing the MSM765zl

Installing the MSM765zl

To install the MSM765zl into a switch, the switch can be powered on or off. 
The following procedure assumes the switch is powered on. 

Installation Procedure

1.

Use a Torx T-10 or flat-bladed screwdriver to unscrew the screws in the 
cover plate over the slot where the MSM765zl is to be installed. Remove 
the cover, and store the cover plate for possible future use.

2.

Hold the MSM765zl by its bulkhead—taking care not to touch the metal 
connectors or components on the board.

3.

Open the extractor handles.

Installation Precautions

■

Static electricity can severely damage the electronic components on the 
MSM765zl. When handling and installing the MSM765zl, follow these 
procedures to avoid damage from static electricity:

•

Handle the MSM765zl by its bulkhead or edges and avoid touching 
the components and the circuitry on the board.

•

When installing the MSM765zl, equalize any static charge difference 
between your body and the switch by wearing a grounding wrist 
strap and attaching it to the switch’s metal body, or by frequently 
touching the switch’s metal body.

■

The MSM765zl has “low-force”, high-performance connectors. High 
insertion forces are not necessary to install the MSM765zl, and should 
not be used.

■

Ensure the MSM765zl is fully inserted.

 Press the MSM765zl into the 

slot until the bulkhead on the MSM765zl contacts or is very close to 
contacting the front face of the switch chassis.

■

Once the MSM765zl is fully inserted, screw in the two retaining screws 
to secure the MSM765zl in place.

■

For safe operation, proper switch cooling, and reduction of electromag-
netic emissions, ensure that a slot cover is installed on any unused 
MSM765zl slot. For safety, no more than one slot should be uncovered 
at a time when the switch is powered on.

■

Respect the temperature specifications for the MSM765zl. 

MSM765-IGSG-5992-5964.book  Page 2  Thursday, April 2, 2009  6:48 PM

Содержание ProCurve MSM765zl

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды