HP ProCurve 8212zl Series, Руководство по установке и началу работы

Страница: 26 / 138

1-16
Introducing the ProCurve Series 8200zl Switch
Switch Features
In
trodu
cin
g
the
ProCurve
Series 8200z
l Switch
■
the supported mini-GBICs can be hot swapped into the mini-GBIC zl
Module
■ high performance—The 8212zl Switch has a routing/switching capacity of
576 Gbps, with a switch fabric speed of 692 Gbps and a throughput of 428
Mpps.
■ plug-and-play networking—all ports are enabled—just connect the
network cables to active network devices and your switched network is
operational.
■
automatic learning of the network addresses in the switch’s 64,000-
address forwarding table, with configurable address aging value.
■ full-duplex operation available on all ports.
■
easy management of the switch through several available interfaces:
• web browser interface—an easy to use built-in graphical interface
that can be accessed from common web browsers.
• console interface—a full featured, easy to use, VT-100 terminal inter-
face for out-of-band switch management, or for telnet access to the
switch. The console includes complete switch management through
a command line interface (CLI) and a slightly reduced feature set
accessible through an intuitive menu interface.
• ProCurve Manager—an SNMP-based graphical interface that is used
to manage your entire network, included with your new switch.
• Supported by ProCurve Network Manager—an HP OpenView appli-
cation that accurately displays your switch on network maps and
provides a graphical interface for configuring and monitoring your
switch.
■ support for the Spanning Tree Protocol to eliminate network loops.
■ support for up to 2048 IEEE 802.1Q-compliant VLANs so you can divide
the attached end nodes into logical groupings that fit your business needs.
■ Layer 3 routing functionality:
• IP static routes
• RIP V1 and V2
• IRDP - ICMP Router Discovery Protocol
• OSPF- Open Shortest Path First
■ support for many other advanced features to enhance network perfor-
mance, security, and control— for a description, see the
Management and
Configuration Guide which is on the ProCurve Web site. See page 5-1 for
details.
■
Support for IEEE 802.3af standard and pre-standard PoE devices.