background image

Category

Description

HP Pro Slate 10 EE G1

HP Pro Tablet 10 EE G1

Audio and video (continued)

2.0-MP, fixed-focus front-
facing webcam

Sensor

Accelerometer

eCompass

Wireless networking

Integrated WLAN + Bluetooth 
combination:

802.11 a\b\g\n 2×2 (Foxconn 
T77H462, Broadcom 
BCM43241) with two antennas; 
Bluetooth class 1 (10-meter 
range), Bluetooth 4.0+LE, 
included with WLAN module; 
support for Miracast

 

 

802.11 a\b\g\n 2×2 (Foxconn 
T77H462) with two antennas; 
Bluetooth class 1 (10-meter 
range), Bluetooth 4.0+LE, 
included with WLAN module; 
support for Miracast

 

 

GPS for Android WLAN 
configurations only:

GPS module and one antenna

 

 

Global WWAN module with 
GPS:

3G (HSPA+) M.2 module, data 
only, modem: Intel XMM6260, 
Huawei, MU736

2 WWAN antennas

NFC antenna

NFC antenna

 

External expansion

 

 

 

 

Integrated microSD Card 
Reader

 

Micro SIM slot (available only 
on products with WWAN 
capability)

Ports

Audio: 3.5-mm 
headphone/microphone 
combo jack (supports 
North America-type 
headset only)

Micro HDMI port

Micro USB 2.0 AB type 
port

Power connector

Power requirements

Supports a 2-cell, 28.49-WHr, 
Li-ion battery (non-removable), 
USB charging battery

2

Chapter 1   Product description

Содержание Pro Slate 10 EE G1

















































































Отзывы: