HP Pro Slate 10 EE G1, Руководство по техническому обслуживанию и ремонту

Страница: 33 / 80

1. Disconnect the battery cable (1) from the system board.
2. Detach the battery (2) from the display panel assembly. (The battery is attached to the display
panel assembly with double-sided adhesive.)
3. Remove the battery.
Reverse this procedure to install the battery.
WWAN module
Description Spare part number
Huawei MU736 HSPA+M.2 with GPS for use only on HP Pro Slate 10 EE G1 tablet models 801160-005
MU736 HS3110 Gen HSPA+m.2 with GPS for use only on HP Pro Tablet 10 EE G1 tablet models 748599-005
Before removing the WWAN module, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see Back cover on page 23 ).
WARNING! To reduce potential safety issues, use only the battery provided with the tablet, a replacement
battery provided by HP, or a compatible battery purchased from HP.
WWAN module 25