Wireless antenna
Description
Spare part number
Antenna Kit, includes WWAN antenna auxiliary and main cables and transceivers and WLAN antenna auxiliary and main cables and
transceivers
For use only on HP Pro Slate 10 EE G1 tablet models
803379-001
For use only on HP Pro Tablet 10 EE G1 tablet models
804221-001
Before removing the wireless antenna, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 23
).
5.
Disconnect the battery cable from the system board (see
Battery on page 24
).
Remove the wireless antenna:
1.
Disconnect the WWAN auxiliary antenna cable (1) from the WWAN module auxiliary terminal.
2.
Release the WWAN auxiliary antenna cable from the retention clips (2) built into the display
panel assembly.
28
Chapter 5 Removal and replacement procedures
Содержание Pro Slate 10 EE G1
Страница 4: ...iv Safety warning notice ...
Страница 8: ...viii ...
Страница 47: ...5 Remove the speaker 5 6 Remove the speaker and cable Reverse this procedure to install the speaker Speaker 39 ...
Страница 53: ...2 Remove the I O cover Reverse this procedure to install the I O cover I O cover 45 ...