HP Pro 1005, Руководство по обслуживанию и ремонту

Страница: 106 / 137

Table A-12 Solving Network Problems
Wake-on-LAN feature is not functioning.
Cause Solution
S5 Maximum Power Saving feature is enabled. Disable the S5 Maximum Power Saving option in Computer
Setup. Select
Power > Hardware Power Management > S5
Maximum Power Saving .
S5 Wake on LAN is disabled. : Enable the S5 Wake on LAN option in Computer Setup.
Select
Advanced > Device Options > S5 Wake on LAN .
Wake-on-LAN is not enabled. To enable Wake-on-LAN in Windows XP:
1. Select Start > Control Panel .
2. Double-click Network Connections .
3. Double-click Local Area Connection .
4. Click Properties .
5. Click Configure .
6. Click the Power Management tab, then select the
check box to Allow this device to bring the computer
out of standby .
To enable Wake-on-LAN in Windows Vista:
1. Select Start > Control Panel .
2. Under Network and Internet , select View network
status and tasks .
3. In the Tasks list, select Manage network connections .
4. Double-click Local Area Connection .
5. Click the Properties button.
6. Click the Configure button.
7. Click the Power Management tab, then select the
check box to Allow this device to wake the computer .
To enable Wake-on-LAN in Windows 7:
1. Select Start > Control Panel .
2. Under Network and Internet , select View network
status and tasks .
3. Click Local Area Connection .
4. Click the Properties button.
5. Click the Configure button.
6. Click the Power Management tab, then select the
check box to Allow this device to wake the computer .
98 Appendix A Troubleshooting Without Diagnostics