HP NonStop TMF, Руководство по программированию

Страница: 37 / 844

HP NonStop TMF Management Programming Manual—540140-008
2-1
2
Communicating With the
TMFSERVE Process
A management application communicates with TMF through the Subsystem
Programmatic Interface (SPI). It retrieves event messages from TMF through the Event
Management Service (EMS).
This section contains the following topics:

Communicating With the TMFSERVE Process on page 2-1

Starting and Opening TMFSERVE on page 2-2

Closing TMFSERVE on page 2-3

Running an EMS Consumer Distributor on page 2-3
Communicating With the TMFSERVE Process
The TMFSERVE process supports management applications written in TAL,
COBOL85, TACL, or C.
When writing a management application using the TMFSERVE process, use the
following guidelines:

It is not a process pair

It can be opened by a primary process or its backup

It can be opened by a requester only once

It can be opened by up to 10 requesters at a time

It can be started by any user that has execute access to the TMFSERVE object file

It responds to one request before it begins work on another (it is single-threaded)

It can accept a sync depth of 0 or 1

It does not support multiple outstanding requests from the same requester

It can only manage TMF on the system where it is running
If you want to manage TMF on a remote system, you must establish communication
with a TMFSERVE process on that system.
If you want to make audit dumps or online dumps using a tape drive on another
system, that system must have labeled-tape processing configured by SYSGEN.