Commands and Responses
HP NonStop TMF Management Programming Manual—540140-008
5-78
DISABLE BEGINTRANS
DISABLE BEGINTRANS
The DISABLE BEGINTRANS command suspends transaction processing throughout
the TMF system.
Command Syntax
For information on the tokens present in the command and response buffers, see the
SPI Programming Manual
.
Usage Guidelines
Only super-group users can issue this command. TMF must be started.
The DISABLE BEGINTRANS command suspends transaction processing by
requesting TMF to disallow new calls to the BEGINTRANSACTION system library
procedure.
Transaction processing remains disabled until you issue the ENABLE BEGINTRANS
command. It remains disabled even if you stop and restart TMF; to re-enable
transaction processing, you must explicitly issue ENABLE BEGINTRANS.
If transaction processing is already disabled when you issue DISABLE BEGINTRANS
command, the ZTMF-ERR-BTDisabled error is returned.
The START TMF command also contains a ZTransAllowOption field that disables
transaction processing.
Command
ZTMF-CMD-Disable
Object Type
ZTMF-OBJ-BeginTrans
Tokens in Command Buffer
None
Tokens in Response Buffer
None
Caution.
Suspending transaction processing can cause your transaction processing
applications to fail; thus, you may have to stop your applications before issuing the DISABLE
BEGINTRANS command. If you must suspend transaction processing, choose a time when
the interruption will affect system users the least.
Содержание NonStop TMF
