Commands and Responses
HP NonStop TMF Management Programming Manual—540140-008
5-49
ALTER MEDIA
ALTER MEDIA
The ALTER MEDIA command changes the configured attribute values of tape
volumes.
Command Syntax
For information on the tokens present in the command and response buffers, see the
SPI Programming Manual
.
Tokens in Command Buffer
ZTMF-TKN-Media
specifies the name of the storage media to be changed. This token is required;
multiple occurrences are allowed.
ZTMF-MAP-Alter-Media
is an extensible structured token specifying the attributes of the media to be
changed. This token is required; only one occurrence is allowed. This token
contains the following fields:
ZMedium
specifies the type of storage media. The following value is valid:
Command
ZTMF-CMD-Alter
Object Type
ZTMF-OBJ-Media
Tokens in Command Buffer
ZTMF-TKN-Media token-type ZTMF-TYP-MEDIA.
ZTMF-MAP-Alter-Media
def ZTMF-DDL-Alter-Media.
02 ZMedium token-type ZSPI-DDL-Enum.
02 ZMediaStatus token-type ZSPI-DDL-Enum.
end.
Tokens in Response Buffer
None.
ZTMF-VAL-MediumTape
Tape storage media
Содержание NonStop TMF
