HP MSM313, Руководство по развертыванию

Страница: 8 / 78

HP MSM313/MSM323 Deployment Guide 6 1 Introduction
About this guide
This guide contains detailed scenarios for using HP MSM313/MSM323 Integrated Services Access
Points and HP MSM Access Points in a wide range of applications.
Although detailed configuration steps are provided for each scenario, this guide does not
cover the basic procedures for operating and configuring HP ProCurve mobility devices.
This information can be found in the Management and Configuration Guides for each
product. You should be familiar with this information before you attempt to use the
scenarios in this guide.
Products covered
This guide covers the following products:
•
MSM313, MSM313-R, MSM323, MSM323-R
•
MSM335, MSM310, MSM310-R, MSM320, MSM320-R
Important terms
The following terms are used in this guide.
Conventions
Management tool
This guide uses specific syntax when directing you to interact with the management tool user
interface. Refer to this image for identification of key user-interface elements and then the table
below showing example instructions:
Term Description
AP Refers only to HP MSM Access Points: MSM335, MSM310,
MSM310-R, MSM320, and MSM320-R.
service controller Refers to the HP MSM Integrated Services Access Points,
comprised of the MSM313, MSM313-R, MSM323, and
MSM323-R.
local mesh In previous versions of the management tool and all former
documentation, “local mesh” was known as “DWDS” (dynamic
wireless distribution system).