HP MSM313, Руководство по развертыванию

Страница: 13 / 78

HP MSM313/MSM323 Deployment Guide 11 2 Public/guest networks
Scenario 1a: Hotspot in a box
This scenario shows you how to quickly deploy and test the service controller without installing a
RADIUS server. Instead, user authentication is handled locally.
How it works
In this scenario, a single service controller is installed to provide a wireless network and access to
the Internet. The service controller is connected to the Internet by way of a broadband modem, and
the Internet connection is protected by the service controller’s firewall and NAT features (which are
enabled by default).
A local area network is connected to the service controller’s LAN port to support wired users. The
service controller acts as the DHCP server on both the wireless and wired networks which are
bridged together on subnet 192.168.1.0.
User authentication is handled locally by the service controller and accounts are created on the
service controller for each user. There is no support for accounting.
The default public access interface resident on the service controller is used to control user logins
and manage their sessions.
The default VSC is used on the service controller, which means that users connect with the SSID
“HP ProCurve”.
Configuration road map
A. Install the service controller
1.
Install the service controller as described in its Quickstart guide.
2.
Connect the Internet port to a broadband modem and then restart the modem.
P
UBLIC WLAN
1.4
1.5
1.6
1.7
Service
controller
LAN
LAN port Internet port
192.168.1.0
1.2 1.3
Management
station
Modem