HP MSM313, Руководство по развертыванию

Страница: 53 / 78

HP MSM313/MSM323 Deployment Guide 51 2 Public/guest networks
Configuration road map
A. On the RADIUS server
Define RADIUS accounts for all users that will use the public access network.
B. Install the service controllers
1.
Install the service controllers at each site as described in the appropriate Quickstart guide.
2.
Connect the Internet port on each unit to a broadband modem that is connected to the Internet.
3.
Start the management tool and configure each unit as described in the sections that follow.
C. Configure the Internet port
1.
Select
Network > Ports > Internet port.
2.
Select the addressing option as required by your ISP and click
Configure
.
3.
Define all settings as required.
D. Configure the wireless network
By default the service controller is configured to:
•
support 802.11b/g clients
•
automatically choose the best operating channel (frequency)
•
create a wireless network named
HP ProCurve
There is no need to change these settings for this scenario.
E. Create a RADIUS profile
1.
Select
Security > RADIUS profiles
.
2.
Click
Add New Profile
.
•
In the
Profile name
box, assign
RADIUS1
to the new profile.
•
In the
Settings
box, use the defaults except for
Authentication method
which must match
the method supported by the RADIUS server.
•
In the
Primary RADIUS server
box, specify the address of the RADIUS server at the NOC
and the secret the service controller will use.
•
Click
Save
.
F. Configure the VSC
1.
Select
VSC > Profiles.
2.
On the
Virtual Service Communities
page, click the
HP ProCurve
profile
.