HP MSM313, Руководство по развертыванию

Страница: 49 / 78

HP MSM313/MSM323 Deployment Guide 47 2 Public/guest networks
goodbye.html
This is the page tenants will see after they logout. It is a standard HTML page and can be
customized as required.
Configure the APs
A. Configure the wireless network
By default each AP is configured to:
•
Automatically select the best operating frequency.
•
Create a wireless network named
HP ProCurve.
•
Act as a DHCP client on its LAN ports.
•
Use the service controller as the access controller.
There is no need to change these settings for this scenario.
B. Configure the location-aware group name
Set a unique group name on each AP as follows:
1.
Select
VSC > Profiles.
2.
Click the
HP ProCurve
profile to edit it.
3.
Under
General
, make sure that the
Use HP ProCurve MSM controller
checkbox is selected.
4.
Under
Location aware
:
•
For AP 1, set
Group name
to
Complex_1
.
•
For AP 2, set
Group name
to
Complex_2
.
•
For AP 3, set
Group name
to
Complex_3
.
5.
Click
Save.
C. Configure the connection to the service controller on the APs
Each AP will use the services of the service controller to authenticate user logins. Do the following
on each AP.
1.
Select
Security > Access controller
2.
Set the
Access controller shared
secret to the same unique value on all APs. For example:
xr2t56. This password will be used by the APs to connect to the service controller when they
send authentication requests.
3.
Click
Save.
Note:
By default the AP is set up to use the default gateway assigned by DHCP as the
access controller. Do not change this setting.