HP MSM313, Руководство по развертыванию

Страница: 72 / 78

HP MSM313/MSM323 Deployment Guide 70 3 Local mesh deployment
3.
In the
General
box
,
select the
Use HP ProCurve MSM controller
check box.
4.
Click
Save.
5.
Select
Security > Access controller.
6.
Set the
Access controller shared
secret to match the secret set on the service controller.
7.
Click
Save.
Note:
By default the AP is set up to use the default gateway assigned by DHCP as the
access controller. Do not change this setting.
E. Create VSCs on the APs
Follow this procedure to create three virtual service communities on all APs.
1.
Select
VSC > Profiles.
2.
On the
Virtual Service Communities
page, click the
HP ProCurve
profile to edit it.
3.
On the
Add/Edit Virtual Service Community
page:
•
Under
General,
set
Name
to
None.
•
Under
General,
select the
Use HP ProCurve MSM controller
check box.
•
Under
Virtual AP,
set
WLAN name (SSID)
to
None.
•
Click
Save.
4.
On the
Virtual Service Communities
page, click
Add new profile.
5.
On the
Add/Edit Virtual Service Community
page:
•
Under
General,
set
Name
to
WPA.
•
Under
General,
select the
Use HP ProCurve MSM controller
check box.
•
Under
Virtual AP,
set
WLAN name (SSID)
to
WPA.
•
Under
Wireless protection:
•
Select the checkbox and leave the default setting of
WPA
.
•
For
Mode,
select
WPA (TKIP) or WPA2 (AES/CCMP).
•
Leave
Key source
as
RADIUS.
•
Click
Save.
6.
On the
Virtual Service Communities
page, click
Add new profile.
7.
On the
Add/Edit Virtual Service Community
page:
•
Under
General,
set
Name
to
8021X.
•
Under
General,
select the
Use HP ProCurve MSM controller
check box.
•
Under
Virtual AP,
set
WLAN name (SSID)
to
8021X.