manualshive.com logo in svg

HP Model 745 - VME Workstation, Руководство пользователя, Страница: 165 / 220

Поделиться
Скачать
HP Model 745 - VME Workstation Скачать руководство пользователя страница 165

          9-11

Dealing With Problems

Recovering from a System Panic

If the reason your system panicked was because of a corrupted file system, 
fsck will report the errors and any corrections it makes. If the problems were 
associated with your root file system, fsck will ask you to reboot your sys-
tem when it’s finished. When you do this on an HP-UX system, use the fol-
lowing command:

 reboot -n 

The -n option tells reboot not to sync the file system before rebooting.

Since fsck has made all the corrections on disk, you do not want to undo the 
changes by writing over them with the corrupt memory buffers.

Step 4: Monitoring the System 

If your system successfully boots, there is a good chance that you can 
resume normal operations. Many system panics are isolated events and are 
unlikely to reoccur.    Check your applications to ensure that they are running 
properly and monitor the system closely. For a day or so, you might want to 
do backups more frequently until you are confident that the system is func-
tioning properly. 

For More Information

Refer to HP-UX System Administration Tasks for further information on 
operating-system related problems. 

Содержание Model 745 - VME Workstation





























































































































































































































Отзывы:

Нет отзывов