manualshive.com logo in svg

HP Model 745 - VME Workstation, Руководство пользователя, Страница: 151 / 220

Поделиться
Скачать
HP Model 745 - VME Workstation Скачать руководство пользователя страница 151

       8-33

Using Mass Storage Devices

Operating the Floppy Drive

3 Enter the following command line:

tar  -xvf   devicefile  pathname  Enter

where devicefile is the device file as listed by sam and pathname is the 
pathname of the file or directory containing files that you want to restore 
from the diskette. If you don’t specify pathname, everything on the 
floppy diskette is restored.

Listing the Files on a Floppy Diskette

Use the following instructions to list the files on a floppy diskette:

1

Load the floppy diskette into the disk drive.

2 In a terminal window, enter the following command line:

tar  -tvf   devicefile Enter

where devicefile is the device file as listed by sam.

All files on the floppy diskette are listed.

For More Information

For more information on using tar and a complete list of the command argu-
ments, refer to the tar man page by typing the following in a terminal win-
dow:

man  tar  Enter

The man utility looks up man pages on the system. 

You can mount the floppy drive as a file system using the SAM utility. Be 
sure to unmount the drive before removing it as a file system. For more 
information about how to mount and unmount the floppy drive, see the man-
ual Using HP-UX (B2910-90001).

For more information on copying data to or from your system to other 
media, including your floppy diskette, refer to the cpio man page by typing 
the following in a terminal window:

Содержание Model 745 - VME Workstation





























































































































































































































Отзывы:

Нет отзывов