HP ML530 - ProLiant - 128 MB RAM Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 295

HP ML530 - ProLiant - 128 MB RAM Скачать руководство пользователя страница 17

About This Guide

HP ProLiant ML530 Generation 2 Server Setup and Installation Guide

xvii

HP CONFIDENTIAL

Writer: Richard O. Heath File Name: a-frnt.doc

Codename: Seattle Slew Part Number: 225579-002 Last Saved On: 1/8/03 2:56 PM

Weight in kg
Weight in lb

This symbol indicates that the component exceeds the recommended
weight for one individual to handle safely.

WARNING: To reduce the risk of personal injury or damage to the
equipment, observe local occupational health and safety requirements
and guidelines for manual material handling.

Rack Stability

WARNING: To reduce the risk of personal injury or damage to the equipment,
be sure that:

•

The leveling jacks are extended to the floor.

•

The full weight of the rack rests on the leveling jacks.

•

The stabilizing feet are attached to the rack if it is a single-rack installation.

•

The racks are coupled together in multiple-rack installations.

•

Only one component is extended at a time. A rack may become unstable if
more than one component is extended for any reason.

«
...
15
16
17
18
19
...
»

Содержание ML530 - ProLiant - 128 MB RAM








































































































































































































































































































Отзывы:

Нет отзывов