HP ML110 - ProLiant G5 2TB Storage Server NAS, Руководство пользователя

Страница: 26 / 172

2. Enter the serial number of the storage server followed by a hyphen (-) in the Computer box and
click Connect . For example:
D4059ABC3433-
.
NOTE:
If you are able to determine the IP address from your DHCP server, you can substitute the
IP address for the serial number and hyphen (-). For example:
192.100.0.1
.
3. Log on to the HP ProLiant Storage Server with the default user name
administrator
and the
password
hpinvent
.
The HP ProLiant Data Protection Storage Server Management console and Rapid Startup Wizard
will start automatically.
NOTE:
You can change the administrator name and password when you configure the server using
the Rapid Startup Wizard.
4.
To complete network configuration using the Rapid Startup Wizard, see
“
Configuring the server on the network ” on page 30.
Logging off and disconnecting
Remote Desktop provides two options when closing a client; you can either disconnect or log off the
system.
Disconnecting leaves the session running on the server. You can reconnect to the server and resume
the session. If you are performing a task on the server, you can start the task and disconnect from the
session. Later, you can log back on the server, re-enter the session, and either resume the task or
check results. This is especially helpful when operating over a remote connection on a long-distance
toll line.
Ending the session is known as logging off . Logging off ends the session running on the server. Any
applications running within the session are closed, and unsaved changes made to open files will be
lost. The next time you log onto the server, a new session is created.
Remote Desktop requires that all connecting users be authenticated, which is why users must log on
each time they start a session.
Telnet Server
Telnet Server is a utility that lets users connect to machines, log on, and obtain a command prompt
remotely. Telnet Server is preinstalled on the storage server but must be activated before use.
CAUTION:
For security reasons, the Telnet Server is disabled by default. The service needs to be modified to enable
access to the storage server with Telnet.
Installing and configuring the server 26