background image

Use the stapler

The device can staple documents consisting of a minimum of two pages and a maximum of 50 pages
of 75-g/m

2

 (20-lb) Letter or A4 paper (a maximum of 25 pages for Ledger or A3 paper). The pages must

be 64 to 199 g/m

2

 (17 to 53 lb) in weight for any paper size that the device supports.

The stacker bin can hold up to 1,000 sheets stacked (without staples).

Heavier or coated media might have a stapling limit of fewer than 50 pages.

If the job you want to have stapled consists of only one sheet, or if it consists of more than 50
sheets, the device delivers the job to the bin without staples.

Select the stapler

You usually can select the stapler through your program or driver, although some options might be
available only through the driver.

Where and how you make selections depends on your program or driver. If you cannot select the stapler
from the program or driver, select the stapler from the control panel.

HP LaserJet 9040/9050 and HP Color LaserJet 9500

1.

Press 

 to enter the menus.

2.

Use 

 and 

 to scroll to 

CONFIGURE DEVICE

 and press 

.

3.

Use 

 and 

 to scroll to 

MULTIFUNC. FINISHER

 and press 

.

4.

Use 

 and 

 to scroll to 

Staples

 and press 

.

5.

Use 

 and 

 to scroll to the desired stapling option and press 

.

Your stapling options are None, One, or Two staples.

HP LaserJet 9040mfp/9050mfp and HP Color LaserJet 9500mfp

1.

Touch 

Copy Settings

.

2.

At the Staple menu, touch 

Corner

 or 

Edge

, depending on where you want the documents stapled,

and then touch 

OK

. If you selected 

Booklet

 from the 

Copies per Page

 menu, your stapling options

are 

None

One

Two

, and 

Saddle Stitch

.

NOTE:

The page icon on the right side of the touch screen shows the position of the staple.

HP LaserJet M9040 MFP and HP LaserJet M9050 MFP

1.

Scroll to and touch 

Administration

.

2.

Scroll to and touch 

Device Behavior

.

3.

Scroll to and touch 

Multifunct. Finisher

.

4.

Touch 

Staples

5.

Touch the desired stapling option, and then touch 

Save

16

Chapter 2   Finisher tasks

ENWW

Содержание LaserJet 9040/9050 - Multifunction Printer

























































Отзывы: