HP J2415A, Инструкция по установке и справочник

Страница: 42 / 116

This chapter describes how to install and use the HP Stack Manager
software and lists the program’s basic and extended features.
Software Description
HP Stack Manager is a software application that serves as the console
interface for the hub. It enables you to configure, monitor, and diagnose your
hub.
HP Stack Manager runs on a Windows-based PC that is connected to a hub
through a direct serial link or a remote modem link. If multiple hubs are
connected on a Distributed Management Chain (using the Extension ports
on each hub), HP Stack Manager can configure and manage any hub on the
chain through a single serial or modem link. For information on PC-to-hub
connections, refer to chapter 1.
N o t e
HP Stack Manager provides basic management functions for all
HP AdvanceStack hubs, both 100VG and 10Base-T. In addition, when the
hubs are equipped with the appropriate modules, HP Stack Manager can
provide extended features depending on the type of hub and the module
installed. For a description of the extended features available with the
Hub-14, refer to “HP Stack Manager Advanced Features” later in this chapter.
HP
S
tack Manager
Installing and Using HP Stack Manager
2-2