HP HPE FlexNetwork MSR Router Series, Руководство по настройке

Страница: 469 / 594

459
•
MSR3012/3024/3044/3064.
Commands and descriptions for distributed devices apply to MSR4060 and MSR4080 routers.
VPLS configuration task list
To configure a VPLS network, perform the following tasks:
•
Configure an IGP to ensure IP connectivity within the backbone.
•
Configure basic MPLS, LDP, GRE, or MPLS TE to establish public tunnels on the backbone
network.
•
Configure VPLS on PEs. For example, configure a VSI, establish a PW, and associate an AC
and a VSI.
This chapter describes only VPLS configurations on a PE. For information about other configurations,
see relevant configuration guides.
To configure VPLS on a PE, perform the following tasks:
Tasks at a glance Remarks
(Required.) Enabling L2VPN N/A
(Required.) Configuring an AC N/A
(Required.) Configuring a VSI N/A
Configuring a PW :
•
(Optional.) Configuring a PW class
•
(Required.) Choose either of the following tasks to configure a PW:
{
Configuring a static PW
{
Configuring an LDP PW
{
Configuring a BGP PW
{
Configuring a BGP auto-discovery LDP PW
Choose a PW configuration
method depending on the
VPLS implementation.
(Required.) Binding an AC to a VSI N/A
(Optional.) Configuring UPE dual homing :
•
Configuring static PW redundancy
•
Configuring LDP PW redundancy
N/A
(Required.) Configuring MAC address learning N/A
(Optional.) Enabling SNMP notifications for L2VPN PW N/A
Enabling L2VPN
Before you enable L2VPN, perform the following tasks:
•
Configure an LSR ID for the PE with the mpls lsr-id command.
•
Enable MPLS with the mpls enable command on the backbone interface of the PE.
To enable L2VPN:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enable L2VPN.
l2vpn enable By default, L2VPN is disabled.