414
Configuring the interface with Ethernet or VLAN
encapsulation
On a Layer 3 Ethernet interface (including Layer 3 Ethernet interface, Layer 3 virtual Ethernet
interface, and VE-L2VPN interface), both the default PW type and default access mode are Ethernet.
On a Layer 3 Ethernet subinterface or VLAN interface, both the default PW type and default access
mode are VLAN.
The PW type and AC access mode determine how the VLAN tag is processed by a PE. Therefore,
the PW types and AC access modes on the local PE and the peer PE must match.
To configure the interface with Ethernet or VLAN encapsulation:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter interface view.
interface
interface-type
interface-number
N/A
3.
(Optional.) Specify the default
next hop IP address or MAC
address.
default-nexthop
{
ip
ip-address
|
mac
{
mac-address
|
broadcast
} }
Required for MPLS L2VPN
interworking.
By default, no default next hop
is specified.
This command is not supported
on a VLAN interface.
Configuring the interface with PPP encapsulation
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter interface view.
interface
{
serial
|
pos
}
number
N/A
3.
Configure the link layer
protocol.
link-protocol
ppp
By default, the link layer
protocol is PPP.
4.
(Optional.) Configure IPCP
negotiation without an IP
address or specify the IPCP
proxy IP address.
•
To configure IPCP negotiation
without an IP address:
ppp ipcp ignore local-ip
•
To specify the IPCP proxy IP
address:
ppp ipcp proxy
ip-address
By default, IPCP negotiation
without an IP address is not
supported and no IPCP proxy
address is specified.
Configuring the interface with HDLC encapsulation
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter interface view.
interface
{
serial
|
pos
}
number
N/A
3.
Configure the link layer
protocol.
link-protocol
hdlc
By default, the link layer
protocol is PPP.
Содержание HPE FlexNetwork MSR Router Series
Страница 10: ...viii Index 540 ...
