418
Step Command
Remarks
and enter auto-discovery
cross-connect group view.
BGP.
4.
Configure an RD for the
cross-connect group.
route-distinguisher
route-distinguisher
By default, no RD is configured for
the cross-connect group.
5.
Configure route targets for
the cross-connect group.
vpn-target
vpn-target
&<1-8>
[
both
|
export-extcommunity
|
import-extcommunity
]
By default, no route targets are
configured for the cross-connect
group.
6.
(Optional.) Reference a PW
class.
pw-class
class-name
By default, no PW class is
referenced.
7.
(Optional.) Configure an
MTU for the PW.
mtu
mtu
The default MTU is 1500 bytes.
8.
Create a local site and enter
site view.
site
site-id
[
range
range-value
]
[
default-offset
default-offset
]
By default, no local site is created.
9.
Create a cross-connect and
enter auto-discovery
cross-connect view.
connection
remote-site-id
remote-site-id
By default, no cross-connect is
created.
After you execute this command,
a PW to the specified remote site
is created and is bound to the
cross-connect.
10.
(Optional.) Reference a
tunnel policy.
tunnel-policy
tunnel-policy-name
By default, no tunnel policy is
referenced.
Configuring a remote CCC connection
To configure a remote CCC connection, perform the following configurations on the PE and P
devices:
•
On the two PEs, use the
ccc
command to specify the incoming and outgoing labels.
•
On each P device between the two PEs, use the
static-lsp transit
command to configure a
static LSP for each direction of the CCC connection. For more information about the
static-lsp
transit
command, see
MPLS Command Reference
.
Follow these guidelines when you configure a remote CCC connection:
•
The outgoing label specified on a device must be the same as the incoming label specified on
the next-hop device.
•
CCC connection settings such as the encapsulation type and control word feature must be
consistent on the two PEs. Otherwise, the PEs might fail to forward packets over the CCC
connection.
To configure a remote CCC connection:
Step Command Remarks
1.
Enter system view.
system-view
N/A
2.
Enter cross-connect
group view.
xconnect-group
group-name
N/A
3.
Enter cross-connect
view.
connection
connection-name
N/A
4.
Create a remote
CCC connection.
ccc in-label
in-label-value
out-label
out-label-value
{
nexthop
nexthop
|
out-interface
interface-type
interface-number
}
[
pw-class
By default, no remote CCC connection is
created.
Use the
out-interface
keyword to specify
the outgoing interface only on a
Содержание HPE FlexNetwork MSR Router Series
Страница 10: ...viii Index 540 ...
