manualshive.com logo in svg

HP Guardian, Руководство пользователя

Поделиться
Скачать
HP Guardian Скачать руководство пользователя страница 115

Using FUP for Basic File Management

Guardian User’s Guide — 425266-001

7- 15

Renaming Files

If you had not supplied the RSFILE file name, FUP would have created the 
ZZRSTART file in your default subvolume as the restart file. 

2. If the duplicate operation fails before it is finished, restart the operation: 

FUP displays the original DUPLICATE command and continues the operation from 
the point of failure. FUP continues to update the restart file. If a second failure 
occurs, a RESTART command restarts the operation from the second point of 
failure.

For more information, see the File Utility Program (FUP) Reference Manual.      

Renaming Files

Use the FUP RENAME command to rename a file or a set of files. To rename a single 
file, enter RENAME followed by the current file name, a comma, and the new file 
name:      

In this example, MABEL.ARCHIVE is the new name of the file. Note that you can 
change the subvolume name and the file name, but not the volume name; a file that is 
renamed remains on the same disk volume. To duplicate a file to another disk volume, 
use the FUP DUPLICATE command. 

To rename a set of files, specify a file set just as you would for the DUPLICATE 
command. When you RENAME a file set, however, all the file names must remain the 
same; only the subvolume name can change. Enter RENAME followed by a file set or 
file-set list to be renamed, a comma, and a destination. For the destination, you must 
specify: 

•

A subvolume name different from the subvolume names in the file set or file-set list 
to be renamed; the renamed files will reside in this different subvolume. 

•

An asterisk (*) in place of the file name; the names of the renamed files will be the 
same as those of the original files. 

Suppose you want to rename the files in subvolumes $BIG.DOCUMNTS and 
$BIG.PROGDOCS. The renamed files must still reside in volume $BIG, but you would 
like to put all of them in the subvolume ALLDOCS. Enter: 

If you omit system names or volume names in the file set or file-set list, FUP assumes 
the current default values. Also, you cannot change the volume names of files with the 
RENAME command. If you include a system or volume name in the file set or file-set 
list to be renamed, the same system or volume name must appear in the destination. 

-RESTART RSFILE 

-RENAME FRED.INFO, MABEL.ARCHIVE 

-RENAME ($BIG.DOCUMNTS.*, $BIG.PROGDOCS.*), $BIG.ALLDOCS.* 

Содержание Guardian













































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды