4.
Double-click the file that has an .exe extension (for example,
filename.exe
). The BIOS
installation begins.
5.
Complete the installation by following the on-screen instructions.
NOTE:
After a message on the screen reports a successful installation, you can delete the
downloaded file from your hard drive.
BIOS Setup Menu
The tables in this section provide an overview of the BIOS Setup menu options.
Main menu
Select
To do this
System information
●
View and change the system time and date.
●
View identification information about your computer.
●
View specification information about the processor,
memory size, and system BIOS.
Security menu
Select
To do this
Administrator password
Control access to Setup Utility.
Power-on password
Control access to your computer.
TPM Status
Disable and deactivate or enable and activate (select models
only)
TPM Operation
Select no operation and TPM status (select models only)
Diagnostics menu
Select
To do this
Primary Hard Disk Self Test
Run a quick or comprehensive self-test on the hard drive.
Memory Test
Run a diagnostic test on the system memory.
Using System Diagnostics
System Diagnostics allows you to run diagnostic tests to determine if the computer hardware is
functioning properly. The following diagnostic tests are available in System Diagnostics:
●
Start-up test—This test analyzes the main computer components that are required to start
the computer.
●
Run-in test—This test repeats the start-up test and checks for intermittent problems that the
start-up test does not detect.
52
Chapter 5 Setup Utility (BIOS) and System Diagnostics
Содержание Folio 13
