HP Folio 13 Скачать руководство пользователя

Страница: 17 / 76

Left side

Item

Component

Description

(1)

Power connector

Connects an AC adapter.

(2)

AC adapter/Battery light

●

White: The computer is connected to external
power and the battery is fully charged.

●

Amber: A battery is charging.

●

Blinking white: The battery charge level is 12% or
less (recharge the battery as soon as possible).

●

Off: The computer is not connected to external
power.

(3)

RJ-45 (network) jack

Connects a network cable.

(4)

HDMI port

Connects an optional video or audio device, such as a
high-definition television, or any compatible digital or
audio component.

(5)

USB 3.0 port

Connects optional USB 3.0 devices and provide
enhanced USB power performance.

NOTE:

The USB 3.0 port is also compatible with USB

1.0 and USB 2.0 devices.

(6)

Digital Media Slot

Supports the following digital card formats:

●

Secure Digital (SD) Memory Card

●

Secure Digital Extended Capacity (SDxC) Memory
Card

●

Secure Digital High Capacity (SDHC) Memory
Card

●

Ultra High Speed MultiMediaCard (UHS/MMC)

(7)

Hard drive light

●

Blinking white: The hard drive is being accessed.

NOTE:

All references to the hard disk drive in this

guide refer to the solid-state (SSD) drive.

(8)

Power light

●

White: The computer is on.

●

Blinking white: The computer is in the Sleep state.

●

Off: The computer is off or in Hibernation.

Left side

Содержание Folio 13













































































Результаты поиска

Содержание Folio 13

Отзывы:

Похожие инструкции для Folio 13

Бренды по названию

Популярные бренды

HP Folio 13, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание Folio 13

Отзывы:

Похожие инструкции для Folio 13

Бренды по названию

Популярные бренды