HP Folio 13, Руководство по техническому обслуживанию и ремонту

Страница: 36 / 76

7. Remove the keyboard (3) .
Reverse this procedure to install the keyboard.
Top cover
NOTE: The top cover spare part kit includes the power button board and cable and the TouchPad
and cable.
Description Spare part number
Top cover 672357-001
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the base enclosure screws (see Base enclosure on page 25 ).
5. Remove the keyboard (see Keyboard on page 26 ).
When replacing the top cover, be sure that the TouchPad button board and cable (see TouchPad
button board on page 31 ) are removed from the defective top cover and installed on the
replacement top cover.
Remove the top cover:
1. Turn the computer right-side up, with the front toward you.
2. Open the computer.
28 Chapter 4 Removal and replacement procedures