HP FlexFabric 7900 Series, Руководство по установке

Страница: 26 / 58

To connect a terminal, for example, a PC, to the switch:
1. Plug the DB-9 female connector of the console cable to the serial port of the PC.
2. Connect the RJ-45 connector to the console port of the switch.
NOTE:
Identify the mark on the console port and make sure you are connecting to the correct port.
Setting terminal parameters
To configure and manage the switch, you must run a terminal emulator program on the console terminal.
The following are the required terminal settings:
•
Bits per second —9,600
•
Data bits —8
• Parity —None
•
Stop bits —1
•
Flow control —None
• Emulation —VT100
To set terminal parameters, for example, on a Windows XP HyperTerminal:
1. Select Start > All Programs > Accessories > Communications > HyperTerminal .
The Connection Description dialog box appears.
2. Enter the name of the new connection in the Name field and click OK .
Figure 24 Connection description
3. Select the serial port to be used from the Connect using list, and click OK .
21