3
Preparing for installation
The HP FlexFabric 5930 Switch Series includes the models and provides power supplies in
Table 1
.
Table 1
HP FlexFabric 5930 Switch Series models and power supplies
Product code
HP description
Alias
JG726A
HP FlexFabric 5930- Switch
HP FlexFabric 5930-32 QSFP+
JG727A
HP FlexFabric 5930- TAA Switch
HP FlexFabric 5930-
TAA
JC680A
HP A58x0AF 650W AC Power Supply
650W AC power supply
JC681A
HP A58x0AF 650W DC Power Supply
650W DC power supply
For regulatory identification purposes, the HP FlexFabric 5930- and HP FlexFabric
5930- TAA products are assigned Regulatory Model Number (RMN). The Regulatory Model
Number for these products is listed below. This regulatory number should not be confused with the
marketing names HP FlexFabric 5930, or product numbers JG726A and JG727A.
Product code
RMN
Description
JG726A
BJNGA-AD0022
HP FlexFabric 5930- Switch
JG727A
BJNGA-AD0022
HP FlexFabric 5930- TAA Switch
Safety recommendations
To avoid any equipment damage or bodily injury caused by improper use, read the following safety
recommendations before installation. Note that the recommendations do not cover every possible
hazardous condition.
•
Before cleaning the switch, unplug all power cords from the switch. Do not clean the switch with wet
cloth or liquid.
•
Do not place the switch near water or in a damp environment. Prevent water or moisture from
entering the switch chassis.
•
Do not place the switch on an unstable case or desk. The switch might be severely damaged in case
of a fall.
•
Ensure proper ventilation of the equipment room and keep the air inlet and outlet vents of the switch
free of obstruction.
•
Connect the yellow-green protection grounding cable before power-on.
•
Make sure the operating voltage is in the required range.
•
To avoid electrical shocks, do not open the chassis while the switch is operating or when the switch
is just powered off.
•
When replacing FRUs, including power supplies and fan trays, wear an ESD-preventive wrist strap
to avoid damaging the units.
