manualshive.com logo in svg

HP Engage One Retail System 143, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP Engage One Retail System 143 Скачать руководство пользователя страница 70

Removing the antennas

The wireless antenna cables connect from the WLAN module to antennas at the top of the computer.

To remove the antennas:

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 19

).

2.

Remove the computer head unit from the stand (

Removing and attaching the Engage One head unit to 

the stand on page 27

).

3.

Remove the display panel from the computer head unit (

Removing the display panel on page 41

)

4.

Position the display panel upside down.

5.

Peel the foam off the top of the display panel.

6.

Peel the antennas off the top of the display panel (1), and the remove the cables from the routing paths 
along the top of the display (2).

To reinstall the antennas, reverse the removal procedure.

62

Chapter 4   Removal and replacement procedures

Содержание Engage One Retail System 143














































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды