6.
To install a memory module, slide the new memory module into the socket at approximately a 30° angle
(1), and then press the memory module down into the socket (2) so that the latches lock it in place.
NOTE:
A memory module can be installed in only one way. Match the notch on the module with the tab
on the memory socket.
7.
Replace the shield over the memory modules by pressing the left side of the shield down onto the
system board (1) and then the pressing the right side down (2).
The computer automatically recognizes the additional memory when you turn on the computer.
Memory modules
47
Содержание Engage One Retail System 143
Страница 4: ...iv Safety warning notice ...
